DCP 350 User Manual
Liability Statement
This product has been built to the high standards of Digital Identification Solutions Group. Please do not
attempt to operate or repair this equipment without adequate training. Any use, operation, or repair in
contravention of this document is strictly forbidden. By acceptance of this system you hereby assume all
liability consequent to your use or misuse of this equipment. Digital Identification Solutions Group assumes
no liability for incidental, special, or consequential damage of any kind. Equipment specifications,
applications and options are subject to change at the sole discretion of Digital Identification Solutions
Group without notice.
Proprietary Notice
All drawings and information herein are the property of Digital Identification Solutions Group. All
unauthorized use and reproduction is prohibited.
Trademark Acknowledgments
EDIsecure
®
is a registered trademark of the Digital Identification Solutions Group. Microsoft, MS, MS-DOS,
Windows 98, Windows XP, Windows Vista, Windows 7, Visual Basic, PowerPoint, Microsoft Press are
registered or trademarks of Microsoft Corporation in the United States or other countries.
This manual and the software described in it are copyrighted
© 2012 Digital Identification Solutions Group. All rights reserved.
EDIsecure
®
is a registered trademark of Digital Identification Solutions AG.
All other trademarks and service marks are the property of their respective owners.
Changes
Any drawing, sketch, diagram, specification or appearance of this document might be slightly different from
original and is subject to change for improvements without prior notice.
To Next Page
Loading...
