DCP 350
4 Utilities
4.1 Card Printer Setup
The EDIsecure
®
DCP 350 is produced with optimized setting. You need to adjust setting value if required or
spare parts are replaced using CardPrinterSetup in our Installation CD. You can adjust following settings
with the CardPrinterSetup.
4.1.1 Run CardPrinterSetup
Pic.74 CardPrinterSetup Log-in
Password input window is displayed when you run
this program. If you enter the correct password, the
recorded setup value will be shown and you can
change values. The password is saved to the
EDIsecure
®
DCP 350 printer. If you use another PC
with same printer, previous password is required to
run this program.
(Default password is none. Please press OK if you
have not set password.)
To Next Page
