EET PMC-D726M - Chapter 2 Installation; Appearance

CET Electric Technology
10
Chapter 2 Installation
2.1 Appearance
Figure 2-1 Appearance (LCD)
Figure 2-2 Appearance (LED)
Caution
Installation of the PMC-D726M should only be performed by qualified, competent
personnel that have the appropriate training and experience with high voltage and current
devices. The meter must be installed in accordance with all local and national electrical
codes.
During the operation of the meter, hazardous voltages are present at the input terminals.
Failure to observe precautions can result in serious or even fatal injury and equipment
damage.