EET PMC-D726M - Appendix B Standards Compliance

CET Electric Technology
52
Appendix B Standards Compliance
Safety Requirements
CE LVD 2006 / 95 / EC
EN 61010-1-1: 2001
EN 61010-2-030: 2010
Insulation
Dielectric test:
Insulation resistance:
Impulse voltage:
IEC 60255-5: 2000
2kV @ 1 minute
>100MΩ
6kV, 1.2/50µs
Electromagnetic Compatibility
CE EMC Directive 2004 / 108 / EC (EN 61326: 2006)
Immunity Tests
Electrostatic discharge
EN 61000-4-2: 2009
Radiated fields
EN 1000-4-3: 2006+A1: 2008+A2: 2010
Fast transients
EN 61000-4-4: 2012
Surges
EN 61000-4-5: 2006
Conducted disturbances
EN 61000-4-6: 2009
Magnetic fields
EN 61000-4-11: 2004
Oscillatory waves
EN 61000-4-2: 2009
Emission Tests
Limits and methods of measurement of
electromagnetic disturbance characteristics of
industrial, scientific and medical (ISM) radio-frequency
equipment
EN 55011: 2009 + A1: 2010 (CISPR 11)
Limits and methods of measurement of radio
disturbance characteristics of information technology
equipment
EN 55022: 2010 (CISPR 22)
Limits for harmonic current emissions for equipment
with rated current ≤16 A
EN 61000-3-2: 2006+A1: 2009 +A2:
2009
Limitation of voltage fluctuations and flicker in low-
voltage supply systems for equipment with rated
current ≤16 A
EN 61000-3-3: 2008
Emission standard for residential, commercial and light-
industrial environments
EN 61000-6-4: 2007+A1: 2011
Electromagnetic emission tests for measuring relays and
protection Equipment
IEC 60255-25: 2000
Mechanical Tests
Vibration Test
Response
IEC 255-2-1: 1989 Level I
Endurance
IEC 255-2-1: 1989 Level I
Shock Test
Response
IEC 255-2-2: 1989 Level I
Endurance
IEC 255-2-2: 1989 Level I
Bump Test
IEC 255-2-2: 1989 Level I