60Service Guide: EFI Fiery Central integrated server
Installing Fiery Central integrated server Software
To Configure the Fiery Central server
1 Right-click the Fiery Central tray icon, select WebTools, and then select the Configure tab.
For information about using Configure and setting default options, click Help in WebTools > Configure.
Or in Command WorkStation, select Device Center > General tab > General Info, and then click Configure in the
lower-right corner.
You can launch WebTools from the Fiery Central tray icon at any time to update your server configuration to reflect
changes in your Fiery Central printing environment.
2 Type your Administrator password.
The default password is Fiery.1.
3 Click OK.
To Next Page
Loading...
