Specifications
This section provides an overview of the Fiery print controller features, specifications, and safety certifications.
Hardware features
• Intel i5-4570S quad core 2.9GHz CPU (up to 3.6 GHz with Turbo Boost enabled)
• Memory: 4GB (2 x 2GB)
• An RJ-45 connector for 10BaseT/100BaseTX/1000BaseT Mbs connectivity over twisted pair cable (upper port)
• 1TB hard disk drive standard
• Built-in DVD drive
Physical specifications
• Operating Environment:
• Temperature: +5°C to +40°C
• Relative Humidity: 10%-85% (non-condensing)
• Power Supply Rating: 100-240V, 50-60Hz, 6A
• Power Supply Voltage Input: 100-240V @ 50-60Hz
• Power Supply Current Input: 100V @ 6A Max.; 240V @ 3A Max.
• Rated Power Consumption: 350W
• Dimensions (Height x Depth x Width): 48.5 cm (19.1 in.) x 48.3 cm (19.0 in.) x 21.5 cm (8.5 in.)
• Weight: 19.7 kg (43.4 lb.)
Networking and connectivity
• Supports AppleTalk and TCP/IP protocols simultaneously.
• Supports EtherTalk Phase 2 (allows users to print from a Mac OS computer to the FC integrated server using the
AppleTalk network protocol over an Ethernet network).
Safety and emissions compliance
The FC integrated server has been certified to meet or surpass the following government standards:
Safety approvals
• IEC 60950-1:2005 (Second Edition) + Am 1:2009 + Am2:2013
To Next Page
Loading...
