Replacing parts
Generally, the FC integrated server requires no regular service or maintenance. Use the procedures in this chapter to
inspect, remove, reseat, and replace major hardware components, as well as install system software.
Overview
This chapter includes information about servicing the following components:
• Boards and cables
• Motherboard components (DIMMs, CPU, CMOS, jumpers, and battery)
• Fans
• Power supply
• Hard disk drive
• DVD drive
Replacement parts are available from your authorized service representative. The terms “replace” and “replacing” are
used throughout this document to refer to the reinstallation of existing components. Install new components only
when necessary. If you determine that a component that you have removed is not faulty, reinstall it.
Note: Replacement parts and specifications are subject to change. When ordering replacement parts, refer to the Parts
List document that shipped with the FC integrated server. Install the correct parts as directed by your service/support
center.
The tools required to service the FC integrated server are listed on page 9.
Important: When performing the service procedures described in this chapter, follow the precautions listed on
page 6.
To Next Page
Loading...
