Elan D12 - Fault Menu (for both Normal and ELAN Modes)

E L A N H O M E S Y S T E M S
Page 24 © ELAN Home Systems 2009 • All rights reserved.
D12 INSTALLATION MANUAL
Press UP and DOWN buttons to select the Channel Range.
Press the Channel button to cycle to the next Utility menu.
Press the Menu button to cycle to the beginning of the Main menu.
Fault Menu (For both Normal and ELAN Modes)
If a fault condition should occur, such as a shorted speaker wire or an overheating issue, the FAULT menu will
appear on the LCD. This message screen will remain in place until the fault condition has been attended to and the
amplifier has been reset or repaired.
Press the UP or DOWN buttons to reset the amplifier, if the amplifier doesn't reset, contact your dealer.
Fault Menu