To access the door, loosen the screws joining the two front and rear
door frames together
Insert the flat-tip screwdriver blade between the two frames to angle
them out, taking care not to damage them.
Turn the door upside down and lift up the front frame
To remove the hinge, simply slide off the pin that secures it to the back
frame
23.3.2.4 Door
In order to remove the door, release it from all the hooks that secure it
to the back frame
When repositioning the door pay attention to its right position by
referring to the index indicated by the red arrow
Technical Support - DMM 105/124 599 75 58-67 Rev.04
To Next Page