23.3.4 Blade
This blade is secured to the drum with slides and secured with a blade.
The appliances produced:
up to Serial Number 420xxxxx
From Serial Number 421xxxxx
Are fitted with a tab which secures the
blade in place, fitted at a right angle to
the drum (see figure)
Are fitted with a tab which secures the
blade in place, fitted in line with the
drum (see figure)
To remove it from the drum:
Insert a flat-tip screwdriver (with a thin blade) into the blade hole as shown below:
For the small sized blade (hole 3) For the normal sized blade (hole 5)
Technical Support - DMM 107/124 599 75 58-67 Rev.04
To Next Page