11
Section B - Refrigerator Cabinet
CABINET TOUCH-UP PROCEDURE (CONT.)
9. Patched area should be allowed to dry three or more hours before rubbing
with compound or polish.
This procedure also applies to the complete refinishing of the cabinet, except
gasket contact areas. All damaged areas should be repaired as outlined in steps 1
through 6 on the previous page. The overall surface of the cabinet should be
sanded thoroughly and cleaned as outlined in step 7.
The cabinet should be given two or more coats of touch-up lacquer and polished
as outlined in steps 8 and 9.
To Next Page
Loading...
