SOI/DT 2010-03 dmm 12/78 599 72 84-41
ª - The padlock: when it is lit, it indicates that all the buttons are
disabled to prevent children from modifying, starting or pausing the
cycle.
To enable/disable this function, a key combination needs to be
pressed.
ª - Wrong choice of an option is displayed by <<Err>>, when a
function not compatible with the chosen programme is selected.
The wrong selection is also signalled by an acoustic alarm.
ª - An alarm code indicates an error in the appliance operation;
simultaneously to the displaying of the code, the START/PAUSE button
flashes.
• Buzzer (configurable)
The buzzer emits:
→ A “beep” when the programmes or an option are selected, when the START/PAUSE button is pressed to
start or pause the cycle.
→ Three “beeps” when an option not compatible with the selected programme is chosen, or when a button is
pressed or a knob turned during a cycle.
→ A particular sequence of “beeps” for a two-minute duration when the cycle has terminated.
→ A particular sequence of three “beeps” to signal an appliance malfunction.
To enable/disable the buzzer during the programme or option selection, see the key-combination described in
the instruction manual.
To Next Page
Loading...
