To Next PageTo Next Page
Need help?Do you have a question about the Electrolux TC2 and is the answer not in the manual?
Essential safety guidelines for servicing washing machines, including qualifications and unplugging the appliance.
Explains the functions of pushbuttons P1-P5 and their associated LED indicators.
Explains the functions of pushbuttons P1-P6 and their associated LED indicators.
Details how the Time Manager modifies washing time for COTTON, SYNTHETICS, and DELICATES programmes.
Explains the Proportional washing characteristic, calculating time based on load and water absorption.
Explains the functions of pushbuttons 1-6 and their associated LCD display information.
Details how the Time Manager modifies washing time for COTTON, SYNTHETICS, and DELICATES programmes.
Steps to enter the diagnostic mode using button presses and programme selector rotation.
Steps to display the total operating time of the appliance using a specific button sequence.
Provides detailed explanations for each washing option, such as Rinse Hold, Night Cycle, and Pre-wash.
Details options like Reduced spin speed, No spin, Intensive, Daily, Light, Quick, Sensitive, Delayed start, and Drying.
Details the two types of door interlock systems and their operation.
Details the heating element, thermal fuses, NTC sensor, and safety precautions during replacement.
Describes the dynamic procedure for controlling unbalanced loads before each spin cycle.
Explains how drying temperature is controlled by an NTC sensor and safety thermostats.
Explains how alarms are displayed to the user via START/PAUSE LED and LCD.
Procedure to access and display the last three stored alarms using the diagnostic mode.
Details the flashing sequence of START/PAUSE LEDs (red/green) for displaying alarm codes.
Illustrates how alarm E43 is displayed using START/PAUSE button red and green light sequences.
Method to display the last three alarms without entering full diagnostic mode.
Procedure to cancel stored alarms by resetting the appliance to E00.
Lists further alarm codes (E41-E61) with their possible faults, machine status, and reset procedures.
Lists additional alarm codes (E62-E9C) with their possible faults, machine status, and reset procedures.
Lists more alarm codes (E9d-EH3) covering communication, power supply, and sensor issues.
Essential safety guidelines for servicing washing machines, including qualifications and unplugging the appliance.
Explains the functions of pushbuttons P1-P5 and their associated LED indicators.
Explains the functions of pushbuttons P1-P6 and their associated LED indicators.
Details how the Time Manager modifies washing time for COTTON, SYNTHETICS, and DELICATES programmes.
Explains the Proportional washing characteristic, calculating time based on load and water absorption.
Explains the functions of pushbuttons 1-6 and their associated LCD display information.
Details how the Time Manager modifies washing time for COTTON, SYNTHETICS, and DELICATES programmes.
Steps to enter the diagnostic mode using button presses and programme selector rotation.
Steps to display the total operating time of the appliance using a specific button sequence.
Provides detailed explanations for each washing option, such as Rinse Hold, Night Cycle, and Pre-wash.
Details options like Reduced spin speed, No spin, Intensive, Daily, Light, Quick, Sensitive, Delayed start, and Drying.
Details the two types of door interlock systems and their operation.
Details the heating element, thermal fuses, NTC sensor, and safety precautions during replacement.
Describes the dynamic procedure for controlling unbalanced loads before each spin cycle.
Explains how drying temperature is controlled by an NTC sensor and safety thermostats.
Explains how alarms are displayed to the user via START/PAUSE LED and LCD.
Procedure to access and display the last three stored alarms using the diagnostic mode.
Details the flashing sequence of START/PAUSE LEDs (red/green) for displaying alarm codes.
Illustrates how alarm E43 is displayed using START/PAUSE button red and green light sequences.
Method to display the last three alarms without entering full diagnostic mode.
Procedure to cancel stored alarms by resetting the appliance to E00.
Lists further alarm codes (E41-E61) with their possible faults, machine status, and reset procedures.
Lists additional alarm codes (E62-E9C) with their possible faults, machine status, and reset procedures.
Lists more alarm codes (E9d-EH3) covering communication, power supply, and sensor issues.
General| Brand | Electrolux |
|---|---|
| Model | TC2 |
| Category | Washer |
| Language | English |
