Service
Manual
31
23
23. Programme unit
438 9145-41/03
03.11
Machine not heated
Here you determine if the machine is to heat the
water to the required temperature before the time
the wash sequence starts, or if the wash time of the
sequence is to begin directly after water filling.
PROGRAM STEP: MAIN WASH 1
STEP TIME: 720 SEC
MACHINE NOT HEATED
REMAINING TIME: 70 MIN
DRUM SPEED: 48 RPM
CHANGE °F/°C
AUTO RESTART
SELECT
991 NORMAL 95°C STD
If you answer Yes (Y):
The machine will not wait for the water to heat,
but will begin to count down the time of on the
wash sequence immediately.
The temperature of the water will, however, still
be monitored and adjusted during filling if the
answer Yes has been inserted for the question
”TEMPERATURE CONTROL OF WATER” (see
next question).
If the answer ”Yes” is in place (Yes is the default)
for the question ”HEATING RELAY ON WHEN
NOT HEATED” (see "Settings 2") the heating
relay (if machine is equipped with one) will switch
on. This means you can heat the water while
wash action is in progress. If you do not want the
heating relay to switch on, you must insert the
answer ”No” for the question ”HEATING RELAY
ON WHEN NOT HEATED”.
If you answer No (N):
The machine will heat the water to the set
temperature before the count down of the wash
sequence begins. The temperature values will be
shown on the display (if you have ”allowed” their
display).
Temperature control of water
Here you determine whether the machine will
monitor and adjust the water temperature during
filling, by opening and closing the cold and hot
water valves.
If you answer Yes (Y):
This function will be activated.
If you answer No (N):
Temperature control not activated. Both the hot
and the cold water valves will be opened until the
machine has filled to the correct level.
CHANGE WASH PROGRAM ALLOWED Y
AUTO RESTART ALLOWED Y
ADJUST SPIN SPEED ALLOWED. Y
DISPLAY REMAINING TIME Y
DISPLAY ACTUAL TEMPERATURE Y
DISPLAY ACTUAL SPEED Y
MACHINE NOT HEATED N
TEMPERATURE CONTROL OF WATER Y
TEMPERATURE IN °CY
REPEAT PROGR. MODE QUESTION N
LOCKED STANDARD WASH PROGRAMS N
LEVEL QUICK COOL-DOWN 175
LEVEL UNBALANCE 0
LEVEL LOW 135
LEVEL MEDIUM 150
Y/N
Answer Yes (Y) or No (N)..
Press .
AUTO RESTART ALLOWED Y
ADJUST SPIN SPEED ALLOWED. Y
DISPLAY REMAINING TIME Y
DISPLAY ACTUAL TEMPERATURE Y
DISPLAY ACTUAL SPEED Y
MACHINE NOT HEATED N
TEMPERATURE CONTROL OF WATER Y
TEMPERATURE IN °CY
REPEAT PROGR. MODE QUESTION N
LOCKED STANDARD WASH PROGRAMS N
LEVEL QUICK COOL-DOWN 175
LEVEL UNBALANCE 0
LEVEL LOW 135
LEVEL MEDIUM 150
LEVEL HIGH 175
Y/N
Answer Yes (Y) or No (N).
Press .
To Next Page
Loading...
Need help?
General
