12. Troubleshooting
12
27
438 9152-11/03
04.03
Service
Manual
WEIGHT FROM SCALE
The scale is all the time sending the actual weight to the timer. If the scale is
over- or under-loaded all the time the error will be indicated.
The same error will also be indicated if the weight transfered from the scale to the
timer at the beginning of a water filling periode, is above a certain limit set in the
configuration system of the machine. To correct the problem, try to first
zerocalibrate the scale and then reset the scale in the servicemode. If the error
remains, please contact service.
To Next Page
Loading...
Need help?
General
