HOPPER SAFETY SUPPORTS
(Serial number F-1000 and above)
WARNING
To prevent damage or injury, check for
obstructions above and in front of the
machine, before raising or tilting the hopper.
When the EAGLE Series-F hopper is fully
raised, its highest point is over 21 feet above
the ground. Overhead wires, cables or tree
branches can be easily snapped by the hopper
and hardly felt by the operator.
WARNING
DO NOT work under or around a raised hop-
per without adequate safety bracing to sup-
port the hopper in the event of a hydraulic
failure. The best method for safe access to the
machine behind the hopper is with the hopper
tilted outward in the dump position with the
hopper tilt support bar in place.
SAFETY
S-5
HOPPER TILT SUPPORT BAR
(IN PLACE)
To Next Page
Loading...
