EasyManua.ls Logo

Elgin Eagle E Series - Operating Checklist and Startup

Elgin Eagle E Series
104 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
greater digging force. A higher pressure indi-
cates less digging force.
36 GEAR SHIFT SELECTOR - See chassis
manufacturers Operators Manual.
37 AUXILIARY ENGINE THROTTLE
CONTROL- To raise engine rpm, depress but-
ton on throttle knob to relase lock and pull
throttle knob up. For fine adjustments rotate
knob.
38 SIDE BROOM AIR PRESSURE
GAUGE (optional) - In digging pressure of the
side broom(s). Lower pressure indicates
greater digging force. A higher pressure indi-
cates less digging force.
39 AIR BRAKE
40 HOPPER SIDE SHIFT OUT/OFF/IN -
Moves the hopper horizontally.
OPERATING CHECKLIST
Successful operation of the Eagle depends on the
following standard daily procedures.
Always follow all recommendations of the chassis
manufacturer.
Engine (Auxiliary and Truck)
Always follow all recommendation of the truck and
auxiliary engine manufacturers.
Check engine oil level.
Check radiator coolant level.
Check battery fluid level (if applicable).
Check belts for wear and proper tension.
NOTICE
Use #1 or #2 diesel fuel only.
Check fuel tank. Fill, if necessary. Filling the
tank at the end of the shift will prevent conden-
sation in the tank as moist air cools.
Clean engine pre-cleaner (if applicable).
OPERATION
O-6

Related product manuals