placing a metal object across the posts. Use
a voltmeter or hydrometer.
Always remove the grounded (–) battery
cable first and replace it last.
Do not charge a frozen battery; it may
explode. Warm the battery to 60° F (16 °C).
AVOID OVERLOADING
ELECTRICAL SYSTEM
Before modifying, adding, removing,
etc. any electrical/electronic compo-
nent(s), verify that the circuitry and
components do not overload the elec-
trical system.
Contact your Elgin Sweeper dealer, if
you have any questions or need assistance.
AVOID HIGH PRESSURE
FLUIDS
Escaping fluid under pres-
sure can penetrate the skin,
causing serious injury. Avoid
the hazard by relieving pres-
sure before disconnecting
hydraulic or other high pres-
sure lines. Tighten all con-
nections before applying pressure. Search for
leaks with a piece of cardboard. Protect hands
and body from high pressure fluids. If accident
occurs, seek immediate medical attention.
Keep hands and body away from pinholes and
nozzles which eject fluids under high pressure.
SAFETY
S-8
To Next Page
Loading...
