Position safety bar in raised
hopper position before
going under hopper shell.
Check hydraulic system
per maintenance schedule.
Refer to maintenance chart for
daily and scheduled servicing.
Maintenance and repairs must be done
by authorized personnel only.
Moving Parts.
Contact can cause
severe injury.
Tilting Hopper.
Can cause
severe injury.
Do not attempt repairs or
go underneath machine
with engine(s) running.
Use extreme care when
making checks or
adjustments that require
the engine(s) to be running.
To avoid possible injury or property damage,
read the operator's manual before using this machine.
Rotating Broom.
Can cause personal
injury.
Do not step on
side broom while
rotating or at rest.
!
WARNING
!
CAUTION
1
2
Water Filter
SERIES F ONLY
Falling Hopper.
Can cause Severe
injury or death
!
WARNING
Position safety support
before going under
raised hopper.
F-1
3
No Step
Safety decals - Right side of Eagle
Overloading the hopper will
result in exceeding the rated
G.V.W. and can cause severe
injury or property damage.
Discontinue hopper loading
and dump hopper when the
full hopper indicator is on.
Before operating this machine,
read the operator's manual
and operator's instructions
on the sun visor.
!
CAUTION
Verify that blocks are properly mounted
and undamaged before operation.
!
WARNING
F-2
Missing hopper shim blocks.
Can cause severe injury.
5
Rotating Broom.
Contact or use of
broom without shroud
Can cause personal injury
or property damage.
WARNING
!
Turn broom and auxiliary
engine off before opening
cover to inspect or service.
Keep broom cover
closed and secued
unless servicing.
!
WARNING
!
DANGER
Hazardous voltage.
Machine contact with
power line will cause
severe injury or death.
Raise or dump hopper in
areas free of power line.
See operator's manual.
Overloading the hopper
will result in exceeding
the rated G.V.W. and can
cause severe injury or
property damage.
Discontinue hopper loading
and dump hopper when the
Overloaded indicator is on.
To avoid possible injury or property damage,
read the sweeper and chassis operator's manuals
before using this machine.
Refer to maintenance chart for daily and scheduled servicing.
Dumping the hopper on
an unlevel surface can
tip the machine and
cause severe injury or
property damage.
Raising the hopper
without adequate
clearance can cause
severe injury or
property damage.
Raise or dump hopper on
level surface only (Not to
exceed 3")
Apply parking brake before
raising or dumping hopper.
Do not move machine when
hopper is raised or dumping.
Raise hopper only in areas
with minimum overhead
clearance of 21 feet (6.4 m).
Maintenance and repairs must be done by authorized personnel only.
6
Use #1 or #2
Diesel fuel only.
7
NOTICE
To Next Page
Loading...
