MAINTENANCE
M-10
10. Use a high pressure hose to dislodge material
between the lower roller and the edge of the
scraper bar. Flush the lower roller from both
sides of the sweeper.
NOTICE
An engine must never be washed or steam cleaned
while it is running. Cold water on a hot manifold
could crack the manifold.
NOTICE
A high pressure hose should never be used to clean
a radiator or oil cooler. The high pressure water
can damage cores.
Figure M-7
Location Of Washdown Hose
Figure M-6
Safety Support in position
(Up to F-999)