Where D02 signifies Door #2. Repeat the same procedures
outlined earlier to enter in the timers needed for door #2. On
completion, press the <*> key to return to main menu.
4.1.5
Adjust Clock
This command allows the user to calibrate the accuracy of
EL2316D calendar clock. It allows the user to add or subtract up
to 60 seconds daily or weekly.
On entering this command, the following appears on the screen: -
OFF, ADD, SUB
(Use <D> to change)
If METHOD is set to ADD or SUB, the next following next screen
appears:
Adjusted daily adjusted weekly
4.1.6
Day Light Saving
This command allow controller automatically adjust time one hour
forward according to the day light saving start date and adjusted one
hour backward according to the day light saving end date.
On entering this command, the following appears on the screen: