You can select either to view data in Door 1 or Door 2. For
example, if you wish to select door 2, just key in [ 0 2 <#> ]. If you
wish to select door 1, key in [ 0 1 <#> ] – There after, the following
screen will appear, giving date, time, card number and transaction
code, one transaction at a time:-
You
can
use <A>
and <B>
ke
ys to s
crol
l da
t
a
up and down.
4.3.2
Print Transaction
There are 4 reports that can be printed under this menu.
<F1> Print All Transactions:
Print out every transaction logged in the buffer.
<F2> Print Alarm Transactions:
Only print out abnormal transactions.
<F3> Print All Individual:
All transactions of a specific card holder to be printed.
<F4> Print Alarm Individual:
All abnormal transactions of a specific holder to be printed.
After selecting the type of report, (for example, Print All
Transactions) the following screen appears:-
You can now opt to print the records of either door 1 or door 2. To
select door 1, key in “ 0 1 <#> “, and for selecting door 2, key in “ 0
2 <#> “.
Note that this function can only be executed when communication
mode (7
th
menu under User menu) is set to Stand Alone Mode.
4.3.3
Second Field for Transaction
Press the <C> Key to activate the Second Field for Transaction
To Next Page
