Elmo GS-800 - Stereo and Monaural Recording

Spot recording
26
To make spot recording without
stopping the projector:
1. Depress the recording button, while
depressing the spot re cord ing
button.
2. Release the spot re co rding button.
Then the recording button is locked
for recording.
3.
To cancel recording, depress the
spot recording button again or stop
the projector.
Stereo recording
o
•
•
Use track 1 for the left channel sound and track 2 for the right
channel sound.
Adjust the recording level of each
track with the volume contro l knob
of respective channe l.
Sta rt the projector wh i Ie depressi ng
both recording buttons for track 1
and track 2.
Note :
Make sure that the recording indicators
of both channels light.
Recording button
Monaural recording
o
•
•
For monaural recording, use either track 1 or track 2.
For recording procedure, see "Record-
ing procedure" on page 20. Adjust
the level with the volume control
knob for the track being recorded.
Make sure
that the recording indicator
lights while recording.
Recording indicator
Volume control knob
27