Elmo GS-800 - Cleaning Procedures

Cleaning
To get maximum performance, regular cleaning is vital. When cleaning, be sure
to set the motor switch at "OF F" and to disconnect the power cord.
•
•
•
Pull the top of the front cover
toward you to open.
Swing the
lens away from the pro-
jector.
Gent ly clean the aperture and
pressure
plate with the brush
supplied or soft lint-free cloth.
Front cover
Dust which adheres to the magnetic head surface may affect recording/
playback performance. So clean the head surface gently by cleaning stick
or soft cloth .
38
Reproducing sound through a stereo set
Connect the AUX OUT jack of the GS-800
with the AUX IN or PB (Playback) jack on
a stereo
amplifier by using the supplied
adaptor plug MP-004. (Connect the AUX
OUT jack of track 1 with left channel, and
the track 2 with the right.)
Adjusting sound level:
Track 1
(L channel)
Track 2
(R channel)
1. Adjust the playback level of the GS-800 to make the level meter swing around
-1 0 (approx. -1 0dBs) .
2.
Adjust the sound level and balance with volume control and balance control
of your amplifier respectively.
15