Elmo GS-800 - Microphone

Microphone
Supplied microphone is high-performance electret condenser type, which requires
one
AA (or R6) battery for operation. Be sure to install the AA (or R6) battery
before operation .
Note :
Unload the battery in case microphone is not used for a long time.
If an exhausted battery is kept in the microphone for a long period, battery fluid may leak
out of the battery and damage the microphone .
36
Microphone proper
Battery
Wind screen
Microphones stand
• Installing battery
Turn the metal case of the microphone counterclockwise and pull out the
inner body until the battery holder
appears.
Load
it with an AA (or R6) battery
in accordance with the polarity
indication.
Note :
The exhaused battery affects output level
of the microphone. In such a case, replace
it with a new one .
Public address
The GS-800 can be used as a public address system.
Plug the microphone to the PA M Ie
jack of either track.
Turn the volume control knob for the
track to get proper sound level.
Note :
I n case stereo-mono selector is set at
STEREO, the voice through the PA system
is heard from the speaker for the track
engaged by the microphone . I n case set
at MONO the voice is heard from both
speakers.
PA jack
(L cahnnell
(R channell
Volume control knob
Track 1
(L channell
Track 2
(R
channell
17