Elmo MX-P3 - Functional Specifications and Adjustments; Illumination, Recording, and System Specs

34
Resolution
Manual
-
-
✔
✔
Flicker
correction
60Hz / 50Hz (Default setting: 60Hz)
✔
-
✔
✔
Contrast
adjustment
Possible (Settable values: 0～20)
Default setting: 10
-
-
✔
✔
Hue adjustment
Possible (Settable values: -180 ～ 180)
Default setting: 0
-
-
✔
✔
Saturation
adjustment
Possible (Settable values: 0～31)
Default setting: 10
-
-
✔
✔
Sharpness
adjustment
Possible (Settable values: 1～15)
Default setting: 5
-
-
✔
✔
White balance
Auto/Manual (Settable values: 2000～8000)
Default setting: Auto 6500
-
-
✔
✔
Initialization
Possible
✔※
1
-
✔
✔
※1 Initialization can be done either by using the Initialization menu or by connecting the product
to your computer via the USB cable while pressing the Lighting/MENU button and the
Freeze button at the same time.
（The items that can be reset are: Brightness, Image rotation, Contrast, Hue, Saturation,
Sharpness, White balance, AF）
◆ILLUMINATION DEVICE
◆OTHER SPECIFICATIONS
Item
Specifications
LED lighting
White LED
Item
Specifications
Recording
SD card 32GB or less, Class 10 or higher
USB
USB 2.0 compliant
Transfer speed
USB2.0 High Speed (480Mbps)
※The actual transfer speed may vary depending on the performance of
your computer and the status of the USB bus.
Audio
Built-in microphone
Sensitivity: -36dB±3dB
Frequency: 100Hz～10KHz
Operating
temperature
0℃～+40℃
Humidity
30％～85％ (No condensation）