Note: The "Errors" and "Warnings" tables are copied from the EnDat
Specification Release F93889, pages 47 and 48 respectively. For more details,
please refer to the reference manual. The EnDat specifications should be used
to resolve any ambiguities
.
Attributes: Type: Report, Floating
Source: RS-232, CANopen
Restriction: None
Range: Not applicable
Unit modes: All
Reference chapters in the SimplIQ Software Manual:
Chapter 8, “The Recorder;” Chapter 9, “Commutation;” Chapter 10, “The Current
Controller”
SimplIQ Command Reference Manual Alphabetical Listing
MAN-SIMCR (Ver. 4.5)
3-159
To Next Page
Loading...
