CP - Clear Program
Purpose:
Clears the entire user area in the serial flash memory. The CP instruction must be used
before any attempt to write a new program to the drive.
Attributes: Type: Command, No value
Source: RS-232, CANopen
Restrictions: MO=0, Program isn’t running
Unit modes: All
Activation: Immediate
Notes:
CP command execution may take a significant amount of time.
Writing to the same flash location without setting CP will cause a write failure and
the flash contents will become undefined.
SimplIQ Command Reference Manual Alphabetical Listing
MAN-SIMCR (Ver. 4.5)
3-26
To Next Page
Loading...
