CAUTION:
Always make sure to turn the power switch off
disconnect the machine from power supply
Raise the needle by turning the handwheel and lower
presser foot.
1
Loosen the needle clamp screw by turning it
counterclockwise.
Remove the needle from the clamp.
1
Needle clamp screw
2
Insert a new needle into the needle clamp with the
flat side of the needle to the rear.
When inserting the needle into the needle clamp,
push it up against the stopper pin and tighten the
needle clamp screw firmly.
2
Stopper pin
3
Flat side
needle onto something flat (a needle plate, glass etc.)
The gap between the needle and the flat surface
be consistent.
Never use a blunt needle.
4
Gap
Chiffon, Georgette, Fine Lace, Organdy
Net, Tulle
Batiste, Voile, Lawn, Pure Silk, Crepe de Chine,
Sheer Crepe, Chambray, Handkerchief Linen,
Gingham, Challis, Percale, W
Soie, Taffeta, Satin, Silk Surah, Satin-backed
Crepe, Qiana
Single Knits, Jersey, Swimwear, and Tricot
Universal
Ball Point
Blue T
9 (65)
9 (65)
11 (75)
11 (75)
12 (80)
11 (75)
11 (75)
Flannel, Velour, Velvet, Muslin, Velveteen,
Poplin, Corduroy, Broadcloth, Linen, Chintz,
Gabardine, Felt, Terry
, Burlap, Quilted Fabrics
Double Knits, (synthetic and natural) St
Velour, Stretch Terry, Sweater Knits
Leather, Vinyl, Suede
Double Faced Wool, Heavy Coating, Fake Fur
Canvas, Duck, Upholstery Fabrics
Topstitching for Special Finishes
Leather Needle
Universal
T