ELNA 2600 - Super Stretch Stitch; 3-Step Zigzag

48
q
17/15
w
e
Super Stretch Stitch
Machine setting
1 Stitch: 17 (Model 2800)
15 (Model 2600)
2
Stitc
h
width
:
5
3 Stitch length: S.S.
4 Thread tension: 3 – 7
5 Presser foot: C (Model 2800)
A
(Mode
l
2600)
Mode
l
2800:
This stitch is ideal for finishing edges of stretch fabrics.
It
seams and finishes the fabric edges simultaneously.
Place the edge of the fabric next to the guide of foot
and
sew while guiding the fabric edge along the guide.
6 Guide
CAUTION:
Do not set the stitch width less than 5 when using
the
overedge foot C, otherwise the needle may hit the
foot
causing the needle to bend or break.
Mode
l
2600:
Place the fabric to leave a 5/8" (1.6 cm)
allowance.
Trim the extra allowance after sewing.
3
-
Step Zigzag
Machine setting
1 Stitch: 3
2 Stitch width: 3 – 5
3 Stitch length: 0.5 – 1.5
4 Thread tension: 3 – 6
5 Presser foot: A
Thi
s
stitc
h
i
s
use
d
t
o
finis
h
a
ra
w
edg
e
o
n
synthetic
s
and
other fabrics that tend to pucker.
Place the fabric to leave a 5/8" (1.6 cm) allowance.
Trim the extra allowance after sewing.
It is also used for mending tears.