Introduction
• registration card
• shipping case
51&AVRprog, PIKprog and SEEprog
programmer configuration
• programmer
• cable with two D-type connectors for connecting the
programmer to the PC
• external power supply (suitable for respective programmer)
• this User's manual
• CD with the control program and additional files
• registration card
• shipping case
PC requirements
Minimal PC requirements
• PC 486
• 16MB RAM
• one CD drive
• HDD, 30 MB free space
• operating system Windows 95/98/Me/NT/2000/XP
• one parallel (LPT) port with nothing attached
Recommended PC requirements
• Pentium PC 100MHz or higher
• 32 MB free RAM
• one CD drive
• HDD, 30 MB free space
• operating system: Windows 95/98/Me/NT/2000/XP
• one parallel (LPT) printer port on PCI bus, with nothing
attached
• in the case of programmer, capable to utilize IEE1284 LPT
port advantages: the IEEE 1284 compatible printer port
(ECP/EPP) on PCI bus
• for BeeProg one USB port, 2.0 compatible
Note: For convenience, we suggest that you use a
supplementary multi I/O card to provide an additional printer
port (LPT2 for example), in order to avoid sharing the same
LPT port between printer and programmer.
11
To Next Page
Loading...