ELNEC s. r. o.
SmartProg programmer is driven by an easy-to-use control
program with pull-down menu, hot keys and on-line help.
Selecting of device is performed by its class, by manufacturer
or simply by typing a fragment of vendor name and/or part
number.
Standard device-related commands (read, blank check,
program, verify, erase) are boosted by some test functions
(insertion test, signature-byte check), and some special
functions (autoincrement).
All known data formats are supported. Automatic file format
detection and conversion during load of file.
The rich-featured autoincrement function enables to assign
individual serial numbers to each programmed device - or
simply increments a serial number, or the function enables to
read serial numbers or any programmed device identification
signatures from a file.
Various socket converters are available to handle device in
PLCC, SOIC and other packages.
Advanced design, including protection circuits, original brand
components and careful manufacturing allows us to provide a
three-year warranty on parts and labour for the SmartProg
(limited 25,000-cycle warranty on ZIF socket).
SmartProg elements
40 pin ZIF socket
LED power/sleep
LED, which indicate work result
YES! button
52
To Next Page
Loading...