ELNEC s. r. o.
Introduction
PIKprog+ is a member of the new generation of Windows
95/98/ME/NT/2000/XP based ELNEC specialized
programmers. Programmer is capable to support all currently
available Microchip
TM
PICmicro
®
series microcontrollers (8-40
pins) using parallel and serial algorithms. The PIKprog+
programmer isn't development grade programmer, but meets
all Microchip's requirements to manufacturing grade of
programmers. The PIKprog+ has been developed in close
cooperation with Microchip
TM
company, therefore
programmer's hardware is focused to support all current and
future PICmicro
®
family microcontrollers.
PIKprog+ is a small, very fast and powerful portable
programmer for PICmicro
®
family microcontrollers and serial
EEPROM with IIC (24Cxx), Microwire (93Cxx) and SPI (25Cxx)
interface types. Using build-in in-circuit serial programming
(ISP) connector programmer is able to program PICmicro
®
family microcontrollers using serial algorithms.
Provides very competitive price but excellent hardware design
for reliable programming. Nice "value for money" in this class.
Very fast programming due to high-speed FPGA driven
hardware and support of IEEE1284 (ECP/EPP) high-speed
parallel port. Surely faster than competitors in this category.
PIKprog+ interfaces with the IBM PC 486 compatible or
higher, portable or desktop personal computers. A programmer
allows you to directly connect to your PC through any standard
parallel (printer) port - no special interface card is needed.
PIKprog+ has 40 powerful TTL pindrivers provide
H/L/pull_up/pull_down and read capability for each pin of
socket. Advanced pindrivers incorporate high-quality high-
speed circuitry to deliver signals without overshoot or ground
bounce for all supported devices. Pin drivers operate down to
1.8V so you'll be ready to program the full range of today's
advanced low-voltage devices.
The programmer performs device insertion test (wrong
device position in socket) and contact check (poor contact pin-
to-socket) before it programs each device. These capabilities,
supported by signature-byte check help prevent chip damage
due to operator error.
PIKprog+ programmer performs programming verification at
the marginal level of supply voltage, which, obviously,
92
To Next Page
Loading...