ELNEC s. r. o.
Introduction
BeeProg is a first member of new USB-compatible generation
of Windows 95/98/Me/NT/2000/XP based ELNEC universal
programmers built to meet the strong demand of the
developers community for the fast, the all programmer user
community of users.
BeeProg supports all kinds of types and silicon technologies of
today and tomorrow programmable devices without family-
specific module. Using build-in in-circuit serial programming
(ISP) connector the programmer is able to program ISP
capable chips in circuit.
BeeProg isn't only programmer, but also tester of TTL/CMOS
logic ICs and memories. Furthermore, it allows generating
user-definable test pattern sequences.
BeeProg provides very competitive price but excellent
hardware design for reliable programming. Probably best
"value for money" programmer in this class.
Very fast programming due to high-speed FPGA driven
hardware and execution of time-critical routines inside of the
programmer. At least fast than competitors in this category.
BeeProg interfaces with the IBM PC 486 compatible or higher,
portable or desktop personal computers through USB (2.0) port
or any standard parallel (printer) port. Programmer also
supports IEEE1284 (ECP/EPP) high-speed parallel port.
Support of USB/LPT port connection give you choice to
connect the BeeProg programmer to any PC, from latest
notebook to older desktop without USB port.
BeeProg has a FPGA based totally reconfigurable 48 powerful
TTL pindrivers provide H/L/pull_up/pull_down and read
capability for each pin of socket. Advanced pindrivers
incorporate high-quality high-speed circuitry to deliver
signals without overshoot or ground bounce for all supported
devices. Pin drivers operate down to 1.8V so you'll be ready to
program the full range of today's advanced low-voltage
devices.
BeeProg performs device insertion test (wrong or backward
position) and contact check (poor contact pin-to-socket)
before it programs each device. These capabilities, supported
by overcurrent protection and signature-byte check help
prevent chip damage due to operator error.
Built-in protection circuits eliminate damage of programmer
and/or programmed device due environment or operator
28
To Next Page
Loading...