BeeProg
failure. All the inputs of the BeeProg programmer, including the
ZIF socket, connection to PC and power supply input, are
protected against ESD up to 15kV.
BeeProg programmer performs programming verification at
the marginal level of supply voltage, which, obviously,
improves programming yield, and guarantees long data
retention.
Various socket converters are available to handle device in
PLCC, SOIC, PSOP, TSOP, TQFP and other packages.
BeeProg programmer is driven by an easy-to-use control
program with pull-down menu, hot keys and on-line help.
Selecting of device is performed by its class, by manufacturer
or simply by typing a fragment of vendor name and/or part
number.
Standard device-related commands (read, blank check,
program, verify, erase) are boosted by some test functions
(insertion test, signature-byte check), and some special
functions (autoincrement, production mode - start immediately
after insertion of chip into socket).
All known data formats are supported. Automatic file format
detection and conversion during load of file.
The rich-featured autoincrement function enables to assign
individual serial numbers to each programmed device - or
simply increments a serial number, or the function enables to
read serial numbers or any programmed device identification
signatures from a file.
It is important to remember that in most cases new devices
require only a software update due to the BeeProg is truly
universal programmer. With our prompt service you can have
new devices can be added to the current list within hours!
Advanced design including protection circuits, original brand
components and careful manufacturing allows us to provide a
three-year warranty on parts and labour for the BeeProg
(limited 25,000-cycle warranty on ZIF socket).
29
To Next Page
Loading...