Software
This page allows you to select another language for user
interface such as menu, buttons, dialogs, information and
messages. It also allows to select wished help file in another
language. For another language support of user interface the
language definition file is required.
Sound
Sound page allows user to select the sound mode of program.
Program generates sounds after some activities, e.g. activities
on device (programming, verifying, reading, etc.). Program
generates sound also when warning or error message is
displayed. User can now select sound from Windows system
sound (required installed sound card), PC speaker or none
sound.
In the panel Programmer internal speaker sound settings is
possible to set sound options for some programmers with built-
in internal speaker. Sound beeps are then generated from
internal programmers speaker after each device operation for
indicating device operation result – good or bad result.
Other
Page Other allows user to manage other program settings. In
the panel Tool buttons, hint display options on toolbar buttons
in main program window can be modified. In the panel Start-up
directory can be selected mode of selecting directory when
program starts. Default start-up directory means directory, from
which program is called. Directory in which program was lastly
ended means the last current directory when program was
lastly ended. This directory assumes the first directory from
directory history list.
Save options
Save options page allows you to select the program options
saving when exiting program. Three options are available here:
Don't save options - don't save options during quitting
program and don't ask for saving options.
Auto save options - save options during quitting program
without asking for saving options.
Prompt for save options - program asks user for saving
options before quitting program. User can select to save or not
to save options.
Options / View
Use the View menu commands to display or hide different
elements of program environment such as toolbars.
Following toolbars are available now:
Options / View / Main toolbar
Choose this command to show or hide the Main toolbar.
Options / View / Additional toolbar
Choose this command to show or hide the Additional toolbar.
141
To Next Page
Loading...