LabProg+
• Microcontrollers 48 series: 87x41, 87x42, 87x48, 87x49,
87x50 series
• Microcontrollers 51 series: 87xx, 87Cxxx, 87LVxx, 89Cxxx,
89Sxxx, 89LVxxx, all manufacturers, Philips 87C748..752
series
• Microcontrollers Intel 196 series: 87C196
KB/KC/KD/KT/KR/...
• Microcontrollers Atmel AVR: AT90Sxxxx, ATtiny series
• Microcontrollers Microchip PICmicro: PIC12Cxxx, PIC16C5x,
PIC16Cxxx, PIC17Cxxx, PIC18Cxxx series
• Microcontrollers Motorola: 68HC11 series
• Microcontrollers National: COP8xxx series
• Microcontrollers NEC: uPD78Pxxx series
• Microcontrollers Scenix (Ubicom): SX18xxx, SX20xxx,
SX28xxx series
• Microcontrollers SGS-Thomson: ST6xx series
• Microcontrollers TI: MSP430 series
• Microcontrollers ZILOG: Z86xxx series
Notes:
• Devices marked * are obsolete, programming with additional
module
• For all supported devices see actual Device list on
www.elnec.com.
I.C. Tester
• TTL type: 54,74 S/LS/ALS/H/HC/HCT series
• CMOS type: 4000, 4500 series
• static RAM: 6116 .. 624000
• user definable test pattern generation
Package support
• package support includes DIP, PLCC, SDIP, SOIC, PSOP,
TSOP, TQFP and other (ask for package converters)
• support all devices in DIP with default ZIF-48 socket
• support devices in non-DIP packages up to 48 pin with
universal adapter (optional accessory, to be ordered
separately)
• compatible with third-party adapters for non-DIP support
Programming speed
Note. These times strongly depend on PC speed, LPT port
type and operating system free resources. Therefore are given
values of two different PC configurations for comparison.
Device Operation Time A Time B
27C010 programming and verify 39 sec 32 sec
AT29C040A programming and verify 110 sec 90 sec
AM29F040 programming and verify 165 sec 139 sec
PIC16C67 programming and verify 46 sec 41 sec
47
To Next Page
Loading...