2-27
To test the drivers:
1 In windows click on Start > Run
2 Enter "cmd" > OK
3 Type "ECHO ELO>\.\LCLD9\" > Enter
The display will show ELO.
Installing the Touch Driver Software
Elo TouchSystems provides driver software that allows your touchmonitor to
work with your computer. Drivers are located on the enclosed CD-ROM for the
following operating systems:
• Windows XP
• Windows 2000
• Windows Me
• Windows 98
• Windows 95
• Windows NT 4.0
• CE 2.x, 3.0, 4x
• Windows XP Embedded
• Windows 3.x
•MS DOS
•OS/2
Additional drivers and driver information for other operating systems (including
Macintosh and Linux) are available on the Elo TouchSystems web site at
www.elotouch.com.
Your Elo USB touchmonitor is plug-and-play compliant. Information on the
video capabilities of your touchmonitor is sent to your video display adapter
when Windows starts. If Windows detects your touchmonitor, follow the
instructions on the screen to install a generic plug-and-play monitor.
Refer to the appropriate following section for driver installation instructions.
To Next Page
Loading...
Need help?
General
