Eloma BACKMASTER EB 30 - Readiness for Operation; Switching the Backmaster EB; Mt; Eb 30 Xl; MT on and off

Readiness for operation
15
3 READINESS FOR OPERATION
3.1 SWITCHING THE BACKMASTER EB 30
MT
/ EB 30 XL
MT
ON AND
OFF
CAUTION!
Condensation due to a change in ambient temperature!
Damage to the control elements.

Make sure that the ambient temperature of the Backmaster is above +4 °C.
3.1.1 SWITCHING ON THE DEVICE
1. Open the operating company's water connection and check whether there is
sufficient water in the tank.
2. Press the
On/Off
key.
The start setting is displayed.
The Backmaster EB 30
MT
/ EB 30 XL
MT
is ready for operation.
3.1.2 SWITCHING OFF THE DEVICE FOR SHORT BREAKS IN OPERATION
1. Press the
On/Off
key.
The touch screen display is extinguished.
2. Close the operating company's water connection.
3. Open the baking chamber door.
3.1.3 MEASURES IN CASE OF A POWER INTERRUPTION OR POWER FAILURE

INFORMATION:
Characteristics of the Backmaster in case of power failure:
The display is extinguished. –
The fan wheel stops. –
The heater stops. –

Close the operating company's water connection.

Open the baking chamber door.
NOTE

When the power supply is restored, the Backmaster runs in standby mode.
Further instructions (continue or cancel baking program) are shown on the
display screen.