Eloma BACKMASTER EB 30 - Fault Messages and Remedies

Clearing faults and malfunctions
67
8.2 FAULT MESSAGES AND REMEDIES
Code Description Cause/remedy
111 Baking chamber sensor
faulty
Stop operation!

Check the sensor
connection.
117 Sensor
Steam damping faulty
Stop operation!

Call customer
service!
211 Excessive temperature,
baking chamber or M1
STB triggered.
Stop operation!

Call customer
service!
314 Lack of water

Top up water.
315 Solenoid valve faulty
Stop operation!

Close the water
valve

Call customer
service!
511 Control module
overheated
Warning! "Module
temperature over 65 °C"
Operation possible.

Call customer
service!
512 Control module severely
overheated
Stop operation! "Module
temperature over 70 °C"

Call customer
service!
Tab. 13: Description of fault messages, possible causes and measures