Eloma BACKMASTER EB 30 - Page 33

Control system structure and operation
33
Item
Symbol
Designation/function
a
Baking with steam injection
field
b
Baking without steam injection
field
4
Back
field
5
Step overview
field

Display of program steps
6 Climatic®
MT
Monitor and slider

Slide the cursor in the Climatic®
MT
Monitor or on the
slider to change the following settings:
In baking operating mode with steam injection: –
Target temperature and steam injection
In baking operating mode without steam –
injection: Target temperature
7 Additional functions

Selected additional functions are highlighted in
green.
a
Preheating
field

Preheating is activated.
b
Half occupancy
field

Low energy consumption for utilisation of less than
full capacity when activated.
8 Parameter settings
a 180°C
356°F
Temperature (in °C or °F)

Sets the baking temperature.
b1 100ml
Steam injection
field

Sets steam injection (in ml or seconds).
In baking operating mode with steam injection only!
b2
Supply air
field

Opens/closes supply air.
When baking without steam injection only!