EasyManua.ls Logo

Elster Q.Sonic PLUS - Page 43

Elster Q.Sonic PLUS
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation
UFM Series 6
Q.Sonic-plus
Operation and Maintenance
Page 43 of 68
Diagnostics
Non fiscal: There are some paths which are failing;
measurement is no longer suitable for custody transfer.
Contact Elster or your local representative.
No Measurement: all paths are failing. Contact Elster or your
local representative.
VoS_avg
Average measured Velocity of Sound of the gas.
Error Volume
FWD
Total volume measured in forward direction, while the meter
was in error mode.
Error Volume
REV
Total volume measured in reverse direction, while the meter
was in error mode.
Pressure
With our optional pressure sensor the live pressure can be
given. If the meter is not equipped with the pressure sensor or
it is not working, a pre-set value will be shown in red.
Temperature
With the optional temperature sensor the live temperature can
be given. If the meter is not equipped with the temperature
sensor or it is not working, a pre-set value will be shown in red.
Density
This value is calculated from the option temperature and
pressure sensor. If the meter is not equipped with the pressure
and/or pressure sensor or they are not working, a pre-set value
will be shown in red.
Viscosity
This value is calculated from the optional temperature and
pressure sensor. If the meter is not equipped with the pressure
and/or pressure sensor or they are not working, a pre-set value
will be shown in red.
Internal
Temperature
This is the temperature measured in the SPU box on the
mainboard. When the electronics are not equipped with the
temperature sensor or it is not working, a pre-set value will be
shown in red.
Table 4: Meter Diagnostics

Table of Contents

Other manuals for Elster Q.Sonic PLUS

Related product manuals