ELTEX SBC-1000 - Time and Date Configuration; Firmware Update Via Web Interface; Licenses

104 SBC session border controllers
Time and date configuration
In the respective fields, you may define the system time in HH:MM
format and the date in DD.month.YYYY format.
To save settings, use «Apply» button.
Click «Synchronize» button to synchronize the device system time
with the current time on a local PC.
Firmware update via web interface
To update the device firmware, use «Service» - «Firmware
update» menu.
A firmware file upload form will open.
– Firmware upgrade — update firmware and/or Linux kernel.
To update the firmware, specify the update file name in «A
firmware image» field using «Browse» button and click «Upload».
When the operation is completed, restart the device using «Service» - «Device restart» menu.
Licenses
To update/add licenses, you should obtain a license file. Contact Eltex marketing department by email
eltex@eltex-co.ru or phone +7 (383) 274-48-48 and provide device serial number and MAC address (see Section
4.1.17).
Next, select «License upgrade» parameter from the «Service» menu.
Specify a path to the license file obtained from the manufacturer using «Select file» button, and update it by
clicking «Update».
Confirmation is required for the license file update.
When the operation is completed, you will be prompted to restart the device, or you should do this manually
using «Service» - «Restart device » menu.