ELTEX SBC-1000 - Sbc-2000

SBC session border controllers 13
The rear panel of the device is shown in Figure 5.
Figure 5 — The rear panel of SBC-1000 (based on SMG-1016M)
The Table below lists rear panel connectors of the device.
Table 3 — Description of rear panel connectors of the switch
№
Rear panel element
Description
1
Power supply connector
Connector for power supply
2
Removable fans
Removable ventilation modules with hot-swapping
3
Earth bonding point
Earth bonding point of the device
SBC-2000
Session border controller SBC-2000 has a metal case available for 19” form-factor rack-mount 1U shelf
installation.
The front panel of device is shown in Figure 6.
Figure 6 — The front panel of SBC-2000 (based on SMG-2016)
Connectors, LEDs and controls located on the front panel of the device are listed in Table 4.
Table 4 — Description of connectors, LEDs, and controls located on the front panel
№
Front panel elements
Description
1
SATA disk ports
Cradle connectors for SATA drive installation
2
F
Function button
3
Console
Console port for local management of the device
4
USB
USB port for external storage device connection
5
0, 1
2 x 10/100/1000BASE-T Gigabit uplink interface RJ-45 connectors used for
IP network connection
6
2, 3
2 chassis for 1000BASE-X uplink interface SFP modules used for IP network
connection
2 x 10/100/1000BASE-T Gigabit uplink interface RJ-45 connectors used for
IP network connection