88 SBC session border controllers
After entering the IP address of the network device for which the connection quality and setting the options
are evaluated, click the «Check» button.
As a result, the utility displays a table containing:
– the node number and its IP address (or network name)
– the percentage of packets lost (Loss%)
– the number of packets sent (Snt)
– the round-trip time of the last packet (Last)
– average round-trip time of the packet (Avg)
– the best round-trip time of the packet (Best)
– the worst time round-trip time of the packet (Wrst)
– the standard deviation of delays for each node (StDev)
Security
4.1.8.1 Management
Security –> Management
In this submenu, the passwords for access to SBC
configuration tools are changed.
In the section «Set the administrator password for web
interface», a password to access the web interface of the admin user
is set.
In the section «Web interface users», web interface users are
created and their rights are assigned. Up to 10 users can be created.
To create a user, click «Add». In the window (on the right),
select a username, a password and confirm the password. Then
specify user rights and click «Apply». To edit, select a user from the
list and press the «Edit» button. Deletion is done by selecting the
user and pressing the «Delete» button.
In the section «Set the administrator password for telnet/ssh», the admin user password for CLI access is set.
By default, the login admin and password
rootpasswd are used to access the web
interface.
The password for admin user access via the
web interface may not be the same as the
password for Telnet, SSH access.
Unable to delete or change admin user rights.
To Next Page
Loading...