SBC session border controllers 89
4.1.8.2 SSL/TLS configuration
This section is intended for downloading or creating a self-signed SSL/TLS certificate that allows using an
encrypted connection to the gateway and uploading/downloading configuration files via HTTPS.
Security –> SSL/TLS settings
– Protocol for WEB-interface — the mode for connection to the web configurator:
HTTP or HTTPS — both unencrypted HTTP and encrypted HTTPS connections are allowed. At that,
connection via HTTPS is possible only when a generated certificate is present.
HTTPS only — only encrypted connection via HTTPS is allowed. Connection via HTTPS is possible
only when a generated certificate is present;
Generate new certificates
These parameters should contain Latin characters only.
– Country code — country code (for Russia — RU);
– Region — the name of a region, province, territory, republic, etc;
– City — city name;
– Company name — organization name;
– Department — the name of the unit or department;
– E-mail — e-mail address;
– Hostname or IP address — the IP address of the gateway.
Upload PEM certificate and key
The section allows you to download a pre-generated and signed PEM certificate and key. To upload, select
the type of file to upload from the drop-down menu. Press the «Browse» button and select the required file. Then
press the «Download» button.
Once the certificate and key have been downloaded, the web server will need to be restarted using
the «Restart web server» button.
To Next Page
Loading...