146 SBC session border controllers
4.3 SBC-2000 switch configuration
The configuration is performed from the switch configuration mode.
SBC2000> config
Entering configuration mode.
SBC2000-[CONFIG]> switch
SBC2000-[CONFIG]-[SWITCH]>
Switch structure
SBC-2000 switch has the following interfaces:
– front-port — external ethernet ports of the switch, which are brought out on the front panel.
Possible values: 0 - 3.
– ports 0 .. 1 — copper ports
– ports 2 .. 3 — optical and copper combo ports.
– port-channel — LAG aggregation groups of switch front-port interfaces, used when multiple front-
ports are combined into a LACP group.
Possible values: 1 — 4.
– host-port — internal ports of the SMG-2016 switch intended for communication with the SMG-2016
processor (CPU).
Possible values: 0 - 2.
– host-channel — LAG host-channel interface aggregation group of the switch, this group is always
active.
To Next Page
Loading...