SBC session border controllers 185
b. The SIP destination table will be as follows:
6. Rule set configuration (menu SBC Configuration/Rule set, section 4.1.3.5).
Create rule set, specify its name, add a rule to the set. In the «Action» field select «Send to destination», in
the «SIP Destination» field specify the destination that was configured for Softswitch. Set the condition to «All»,
save the rule and the rule set.
7. Binding a rule to a destination for subscribers.
a. Go to the «SIP Users» section, select the previously created destination and in the «Rule set» select
the created rule set.
To Next Page
Loading...