ELTEX SBC-1000 - Page 198

198 SBC session border controllers
Name
OID
Requests
Description
For subordinate object, 1 or 2 is
specified as number of power supply
unit.
sbcPowerModuleEnt
ry
1.3.6.1.4.1.35265.1.49.36.1
Get {}
see sbcPowerModuleTable
pmExist
1.3.6.1.4.1.35265.1.49.36.1.2.x
Get {}.x
Status of the battery installation
1 — installed
2 — not installed
pmPower
1.3.6.1.4.1.35265.1.49.36.1.3.x
Get {}.x
Power units are
1 — enabled
2 — disabled
pmType
1.3.6.1.4.1.35265.1.49.36.1.4.x
Get {}.x
Type of the installed PSU
1 — PM48/12
2 — PM220/12
3 — PM220/12V
4 — PM150-220/12
sbcCpuLoadTable
1.3.6.1.4.1.35265.1.49.37
Get {}
CPU load, root object. Shows the
percentage of CPU usage by task
type. For child objects, specify the
CPU number:
sbc1016M — 1
sbc2016 — 1..4
sbcCpuLoadEntry
1.3.6.1.4.1.35265.1.49.37.1
Get {}
see sbcCpuLoadTable
cpuUsr
1.3.6.1.4.1.35265.1.49.37.1.2.x
Get {}.x
% CPU, user applications
cpuSys
1.3.6.1.4.1.35265.1.49.37.1.3.x
Get {}.x
% CPU, kernel applications
cpuNic
1.3.6.1.4.1.35265.1.49.37.1.4.x
Get {}.x
% CPU, applications with changed
priority
cpuIdle
1.3.6.1.4.1.35265.1.49.37.1.5.
Get {}.x
% CPU idle
cpuIo
1.3.6.1.4.1.35265.1.49.37.1.6.x
Get {}.x
% CPU, I/o operations
cpuIrq
1.3.6.1.4.1.35265.1.49.37.1.7.x
Get {}.x
% CPU, hardware interrupt
processing
cpuSirq
1.3.6.1.4.1.35265.1.49.37.1.8.x
Get {}.x
% CPU, the processing of firmware
interrupts
cpuUsage
1.3.6.1.4.1.35265.1.49.37.1.9.x
Get {}.x
% CPU, total utilization
activeCallCount
1.3.6.1.4.1.35265.1.49.42.1
Get {}
Number of current active calls
registrationCount
1.3.6.1.4.1.35265.1.49.42.2
Get {}
Current number registrations
Table D. 3 – Syslog settings
Name
OID
Requests
Description
sbcSyslog
1.3.6.1.4.1.35265.1.49.34
Get {}
Syslog settings, root object
sbcSyslogHistory
1.3.6.1.4.1.35265.1.49.34.2
Get {}
Set up logging the command history
to syslog, root object
sbcSyslogHistoryAddress
1.3.6.1.4.1.35265.1.49.34.2.1
Get {}
Set {} S
IP address of syslog to receive the
command history
sbcSyslogHistoryPort
1.3.6.1.4.1.35265.1.49.34.2.2
Get {}
Set {} N
The syslog server port to receive the
command history