54 SBC session border controllers
4.1.3.2 SIP Destination
This submenu allows editing the list of destinations for receiving and sending calls to end nodes. Up to 256
destinations can be created.
To create, edit or remove interfaces, use 'Objects' — 'Add an object', 'Objects' — 'Edit an object' and 'Objects'
— 'Remove an object' and the following buttons:
– "Add";
– «Edit»;
– «Delete».
SBC Configuration –> SIP Destination
SBC Configuration –> SIP Destination –> "Add" or "Delete"
Destination parameters
– Name — an arbitrary name for identification, convenient for the operator;
– SIP transport — transport to be used to receive calls to and from the destination.
– Remote Address — the address of the remote node which is associated with this destination. Calls to the
destination from an IP address other than the one specified in this field will be rejected. Calls from the
destination will be sent to the address specified in this field.
To Next Page
Loading...